Protective equipment typical about metal laser cutting machine, laser protective goggles is due to avoid the laser protective goggles to the human eye injury, according to its principle of protection can be divided into reflection, absorption, diffraction and combined several, of course, they will be based on the metal laser cutting machine laser radiation wave productive line filter protection, in order to maintain in the body metal laser cutting machine laser, which is on the market is relatively safe lunch protective equipment of laser cutting machine.

Laser cutting machine manufacturers from the laser emission, through the optical path system, focused into a high power density laser beam.The laser beam shines on the workpiece surface, making the workpiece reach the melting or boiling point, while the high-pressure gas coaxial with the beam blows away the melted or gasified metal.For the plasma arc plasma cutting machine can also be used in this form of protection.

At the same time, the metal laser cutting machine and plasma cutting machine are particularly important for the radiation of workers in actual operation and control, especially for the damage to the eyes. The following are some common knowledge about eye protection:

1. When the lenses of the eyes, goggles or working cap are dented, please change them immediately.

2. When laying out the cutting site, the following measures (pointer to the solution to the problem) can be taken to reduce the reflection or radiation of ultraviolet rays: paint the walls of the work site dark to reduce the radiation;Install protective screens or drapes to reduce uv radiation.Laser cutting machine manufacturers from the laser emission, through the optical path system, focused into a high power density laser beam.

The laser beam shines on the workpiece surface, making the workpiece reach the melting or boiling point, while the high-pressure gas coaxial with the beam blows away the melted or gasified metal.The metal laser cutting machine also adds auxiliary gas suitable for the material to be cut.When steel is cut, oxygen is used as an auxiliary gas to produce exothermic chemical reaction oxidation material with the molten metal and to help blow away the slag in the cutting seam.Cutting polypropylene type of plastic using compressed air, cotton, paper and other flammable materials cutting using inert gas.

Laser cutting machine manufacturers replace the traditional mechanical knife with invisible beam, with high precision, fast cutting, not limited to cutting patterns, automatic typesetting saving materials, smooth incision, low processing costs.

3. According to national or local regulations, wear protective dark eyes or goggles, or a welding cap, to protect the eyes from the glare of flames, Ultraviolet rays, and Infrared rays.

Laser cutting machine manufacturers from the laser emission, through the optical path system, focused into a high power density laser beam.The laser beam shines on the workpiece surface, making the workpiece reach the melting or boiling point, while the high-pressure gas coaxial with the beam blows away the melted or gasified metal.

4. Others in the work area are advised not to look directly at the arc light or flame during cutting.

5, pay attention to adjust in the diet, strengthen the Radiation (Radiation) to human body if there is enough health level, about the metal laser segmentation machine slightly Radiation is able to resist.So the metal laser cutting machine (use: metal cutting, non-metallic cutting) operation control personnel should pay attention to eat more carrots, bean sprouts, tomatoes, lean meat, animal liver and other rich in vitamins (also known as vitamin) A, C and protein food, often drink some green tea and so on.Since these foods can help people maintain their eyes better, the human body can be better maintained under the radiation of laser segmentation machine (purpose: metal cutting, non-metal cutting).