NEWS
Aurora Laser
Plate cutting, laser cutting machine performance is better
Time:
2019-11-26 10:14
Source:
Why is the laser cutting machine better than the traditional cutting method in cutting thin plates? Today we talk about the advantages of the laser cutting machine in terms of specific processing conditions compared with the traditional cutting method?
The safe processing of the fiber laser cutting machine belongs to non-contact processing, which solves the defects of mechanical pressure and deformation caused by traditional metal processing on the workpiece, and will not cause any wear to the instrument and workpiece. Coating and surface treatment have good cutting effect. The processing cost is low, the fiber laser cutting machine is faster than other cutting equipment, and the cost of use is cheaper than traditional equipment. Fiber laser can also reduce the use of lenses, greatly reducing production and maintenance costs.
The laser is excited by the material, the light intensity, and the temperature of the contact material can melt quickly on the surface of the material, form a perforation, and form a cutting point according to the registered movement. Compared with the traditional cutting method, the gap between this method and the traditional cutting method is smaller, and it is more economical. most of the material. Environmentally friendly processing, the fiber cutting machine has less waste, low noise, clean, safe, and pollution-free, which greatly improves the working environment.
The flexibility is high, and there is no need to manually operate the fiber laser cutting machine, which can save a lot of money in production costs. On the other hand, the metal laser cutting machine can cut various complex graphics, just input the drawing into the console, and the machine will automatically process the required graphics. Since laser cutting has a high trimming ability and adapts to changes in production capacity, workpiece processing does not require further processing (polishing, deburring, polishing, etc.), and from a production point of view, it further saves labor costs and processing costs. Improved production efficiency
Related News