NEWS
Aurora Laser
Carbon Steel Laser Cutting Machine
Time:
2019-11-27 11:50
Source:
The company produces straight lines and parts with the same angle all the year round, and starts to use laser cutting machines regardless of the need for covariant cutting process cutting. Carbon steel laser cutting machines are upgraded for the industry. For laser cutting machines, the reason for choosing equipment is that there is a common cutting process, which can not only meet the needs of daily production, but also save a lot of time.
Laser cutting machine gas is used to blow off the slag on the surface of the workpiece when the exposed surface of the workpiece is gasified. If the gas is not used, the slag will cool down and form burrs that will adhere to the cutting surface. Therefore, the purity of the gas must be high, and we can change to a higher quality gas supplier. The purity of the gas is very important, and we should not use cylinder gas, because after two fillings, the purity is not good and the gas is wasted.
Another reason is the quality of the equipment itself and the factors of parameter setting, so when customers buy a laser cutting machine, they must have experienced operators to adjust the equipment. Therefore, try to adjust the cutting parameters to a good one. What is the cutting speed of the focal length of the air pressure flow? It needs to be adjusted many times. The parameters provided by the machine tool are not cut out of high-quality workpieces.
The main factors for the brand of laser cutting machine to determine its service life are as follows:
The rigidity of the machine tool, simply put, the heavier the tonnage of the machine tool, the better the rigidity!
Machine tool equipment configuration, transmission equipment brand and quality!
The level of craftsmanship, the accumulation of corporate craftsmanship, and the inheritance of experience!
When cutting with a fiber laser cutting machine, different cutting gases are selected according to the material of the cutting board. The choice of gas and pressure has a great influence on the quality of fiber laser cutting machine.
Influence of cutting gas and pressure on cutting quality
1) The cutting gas helps to dissipate heat and burn, and blows away the melt, so as to obtain a better quality cutting section.
2) When the cutting gas pressure is insufficient, the cutting quality will be affected as follows: melting will occur during the cutting process, the cutting speed cannot meet the requirements, and the production efficiency will be affected.
3) When the cutting gas pressure is too high, the impact on the cutting quality: the cutting surface is relatively rough, the cutting seam is relatively wide; at the same time, the cutting section will be melted, and a good cutting section cannot be formed.
The laser cutting machine simply talks about the benefits that a good cutting machine process will bring to users from the laser side cutting process.
After starting the fiber laser cutting machine with the automatic edge finding function, the cutting head can start from a specified point, then automatically measure several points of the vertical edge of the plate, and then calculate the inclination angle of the plate and the origin of the plate automatically, so as to complete the cutting task. As we all know, the workpiece on the table weighs hundreds of kilograms, so it is not easy to adjust and move. Using the automatic edge finding function of the fiber laser cutting machine saves the time for adjusting the workpiece and improves the working efficiency of the machine.
The continuous development of shipbuilding technology has brought great changes in shipbuilding materials and ship design. The application of laser technology in shipbuilding is unique, which is closely related to the characteristics of ship processing applications and the characteristics of laser manufacturing systems. So, what are the specific applications of lasers on ships?
In the past few years, many laser cutting machines continued to pursue breakthroughs in power levels during development, and competition emerged. It seemed that whoever had the highest power level would be the most severe, with the highest level of technology and product quality. In fact, this kind of thinking is one-sided.
Now, as laser cutting machines are more and more widely used, the needs of users determine product development and production, because users are not only more powerful laser cutting machines for enterprises, but also value the effectiveness of your laser cutting machines. In other words, if a customer can use a 500W fiber laser cutting machine to cut high-quality workpieces, but the 1000W fiber laser cutting machine is not as good as that, then the 1000W fiber laser cutting machine is meaningless to the customer.
There is an old saying in China: Don’t be afraid of the goods, be afraid of the goods, be afraid of the goods when you compare them! Compared with what? Compared with cutting accuracy; compared with cutting efficiency; compared with maintenance
Related News