Hello everyone, a new maintenance case is here. Our goal is to solve the problems of difficult, slow, and expensive maintenance for customers. Each issue of promoting real maintenance cases is the best proof of our maintenance team's professionalism and efficiency.

We hope to meet each other at the right time. You happen to need it, and I happen to be professional. This issue mainly brings you maintenance cases such as laser module maintenance, fiber optic maintenance, cutting head modification, and power repair. Let's take a look together.

 

Maintenance Case 1
Device type: Raycus 4000W, Raytools BM114S Cutting Head
Failure phenomenon: The lenses are a bit burnt
Maintenance items: The engineer replaced the cutting head lenses on site and resumed normal operations afterwards

 

Maintenance Case 2
Device type: Lead Laser 2019, Max 6000W, Raytools BM06K Cutting Head
Failure phenomenon: During use, the follower collided with the plate, causing the ceramic body to shatter and the ceramic and gasket of the ceramic body to crack
Maintenance items: After the engineer replaced the ceramic body and forcibly calibrated the parameters of the adjustment box, the follow-up problem was solved.

 

Maintenance Case 3
Device type: Lexi Laser, Max 1000W
Failure phenomenon: The output power is unstable. After inspection by the engineer, it was found that the circuit board was burnt out
Maintenance items: After communicating with the customer, replace the circuit board and resume normal production operations

 

Maintenance Case 4
Device type: Laser source 4000W
Failure phenomenon: Mainly caused by blockage of the gas path, the cutting head lens and fiber optic protective cap are dotted
Maintenance items: The engineer replaced the complete set of cutting head lenses, replaced the fiber optic protective cap, and replaced the cutting head pneumatic components on site to restore normal production

 

Maintenance Case 5
Device type: 2019 IPG 6000W
Failure phenomenon: Fiber optic burnout
Maintenance items: After replacing the optical fiber, the cutting is normal

 

Maintenance Case 6
Device type: 2020 Lead Laser, IPG6000-K
Failure phenomenon: Laser power attenuation, unclear marking, perforation and slag spraying
Maintenance items: After the engineer made adjustments to the mirror panel, the adjustment was clearly marked and the perforation was free of slag spraying, making it suitable for mass production

 

Maintenance Case 7
Device type: Tianhong 2016, Raycus 1000W
Failure phenomenon: The Z-axis encoder has no response, and the Z-axis cannot be moved. The customer dismantled the motor themselves, resulting in a problem with the circuit
Maintenance items: After the engineer arrived at the site and understood the overall situation, the circuit was repaired and the motor was restored, allowing for normal production

 

Maintenance Case 8
Device type: IPG YLR-3000K
Failure phenomenon: The optical module is burnt out
Maintenance items: After replacing the module, resume production

 

Maintenance Case 9
Device type: MAX G2, 2000W
Failure phenomenon: Fiber optic and lens burnout
Maintenance items: Replace the optical fiber and replace the lens with Raytools cutting head

 

Maintenance Case 10
Device type: Hans, 2017 IPG 4000W
Failure phenomenon: Power decrease, a module is found to be damaged through log status analysis
Maintenance items: After replacing the corresponding damaged module, the power returns to normal

 

Maintenance Case 11
Device type: IPG 4000W
Failure phenomenon: Through work log analysis, it was detected that one internal module was damaged
Maintenance items: Replace one module and restore full power after maintenance

 

Maintenance Case 12
Device type: 2015 IPG 2000W
Failure phenomenon: Fiber optic burnout
Maintenance items: Replacing optical fibers

 

Maintenance Case 13
Device type: 2018 IPG 3000W
Failure phenomenon: After inspection, the engineer found that one module was damaged internally
Maintenance items: After replacing the module on site, the power returned to normal

 

Maintenance Case 14
Device type: 2015 IPG 4000W
Failure phenomenon: Long term use leads to power attenuation, reduced cutting speed, and on-site inspection reveals damage to three internal modules
Maintenance items: After the engineer repaired the module on site, it returned to normal

 

Maintenance Case 15
Device type: Shanghai Prima 2012, Raytools Cutting Head
Failure phenomenon: The customer damaged the original Prey capacitor head, resulting in the inability to perform cutting operations
Maintenance items: After the engineer replaced the domestically produced Raytools sensor and amplifier on site, it returned to normal

 

If you also encounter various problems with the laser source, please feel free to contact us. We will provide the most professional, high-quality, and fast service to help you solve problems, safeguard your laser equipment, and improve production efficiency!

In addition, our company also sells various types of laser accessories and consumables, such as cutting heads, nozzles, protective lens, ceramic rings, etc. Both original and domestic products are available for sale. If you need them, please feel free to inquire.

 

 

 

 

 

Nanjing Aurora Laser Technology Co., Ltd. is a technical enterprise providing domestic and foreign industrial laser technology consulting, maintenance services, laser welding machine application, laser cutting machine maintenance and laser spare parts sales.

Main Products: Laser Nozzles, Ceramics, Protective windows, Focusing and Collimating lens, Sensors, Cutting heads, Laser source, Water chillers, Laser Welding and Cutting Machine

Technical Advantages: With more than 10 years of maintenance and service experience in the laser field, the company has cooperated with many well-known enterprises, and has many experienced maintenance engineers, process engineers, installation and commissioning engineers, who can provide on-site service at any time to ensure the efficient operation of your equipment.