We have an innovative technical team and have served customers all over the world. We have mature maintenance experience in various types of high and low power fiber lasers both domestically and internationally. We continuously break through and innovate in technology to reduce customer maintenance costs and win their trust! Let laser application equipment create maximum value for customers in industrial production!

Next, let me show you the maintenance cases of this week, mainly focusing on the maintenance plans made for cutting head faults, laser power failure, fiber optics, and other issues.

 

Repair Case 1
Device type: Han's self made cutting head
Failure phenomenon: The internal lens of the cutting head has burnt spots, black spots inside the red light, and the sealing of the lower protective lens is prone to loosening
Maintenance items: Replace the complete set of lenses and lower protective plug seal for the cutting head

 

 

Repair Case 2

Device type: Max laser source 1500W, Hanli water chiller 1500W
Failure phenomenon: The internal lens of the customer's cutting head burned out
Maintenance items: Help customers install new lasers and chillers, and replace the internal lenses of the cutting head

 

Repair Case 3

Device type: 3D cutting, IPG-YLS-3000w
Failure phenomenon: Robot fiber optic fracture
Maintenance items: Replace fiber 

 

Repair Case 4

Device type: 2014 Messer Laser, IPG 4000W
Failure phenomenon: The laser module is severely damaged, resulting in power failure
Maintenance items: Replaced with Raycus 3000w, resumed normal production

↓↓

Maintenance effect display: 

 

 

Repair Case 5

Device type: Hongshan self made cutting head
Failure phenomenon: The flooding seal was burned out, causing dust to enter the internal lenses
Maintenance items: The engineer replaced the internal lenses on site and maintained the cutting head

↓↓

Maintenance effect display: 

 

Repair Case 6

Device type: Raycus 4000W
Failure phenomenon: The internal lenses of the cutting head of the original Raytools BM114S were burned out and severely damaged
Maintenance items: Transformed into a set of Raytools BM06K cutting heads and replaced with fiber optic caps

↓↓

Maintenance effect display: 

 

Repair Case 7

Device type: 2018 Bodor, Raycus 1500W
Failure phenomenon: The laser has malfunctioned and cannot be used. The engineer came to open the laser disk and found that the fiber optic was severely burned out
Maintenance items: Replace the Max 1500 laser source

↓↓

Maintenance effect display: 

 

 

Repair Case 8

Device type: IPG 2500W in 2018
Failure phenomenon: The internal module of the laser source has burned out
Maintenance items: After replacing the module, restore full power

↓↓

Maintenance effect display: 

 

 

Repair Case 9

Device type: 2021 Lead Laser, Raycus 3000W
Failure phenomenon: Focusing axis alarm, original cutting head cannot be used normally
Maintenance items: Replace with a new Raytools BM111 cutting head and match with the replacement of the Yaskawa driver

↓↓

Maintenance effect display: 

 

Repair Case 10

Device type: Hongshan Laser in 2021, Raycus 3000W
Failure phenomenon: The sealing ring burned, causing dust to enter all the internal lenses
Maintenance items: After replacing the entire set of Ospri lenses, production resumed

↓↓

Maintenance effect display: 

 

 

If you also encounter various problems with the laser source, please feel free to contact us. We will provide the most professional, high-quality, and fast service to help you solve problems, safeguard your laser equipment, and improve production efficiency!

In addition, our company also sells various types of laser accessories and consumables, such as cutting heads, nozzles, protective lens, ceramic rings, etc. Both original and domestic products are available for sale. If you need them, please feel free to contact us.

 

 

 

 

 

 

Nanjing Aurora Laser Technology Co., Ltd. is a technical enterprise providing domestic and foreign industrial laser technology consulting, maintenance services, laser welding machine application, laser cutting machine maintenance and laser spare parts sales.

Main Products: Laser Nozzles, Ceramics, Protective windows, Focusing and Collimating lens, Sensors, Cutting heads, Laser source, Water chillers, Laser Welding and Cutting Machine

Technical Advantages: With more than 10 years of maintenance and service experience in the laser field, the company has cooperated with many well-known enterprises, and has many experienced maintenance engineers, process engineers, installation and commissioning engineers, who can provide on-site service at any time to ensure the efficient operation of your equipment.